> For the complete documentation index, see [llms.txt](https://sexytrees.savimbo.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://sexytrees.savimbo.com/practice-guide/biochar/fabrication-of-kon-tiki-kiln.md).

# Fabrication of Kon-Tiki kiln

Manual for construction and use

## What is a Kon-Tiki oven?

<div align="center"><figure><img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2FXNiW7Hy7rb33obkh8E62%2Funknown.png?alt=media&amp;token=3897e48c-39e8-4787-bd7b-48be340b2e7d" alt=""><figcaption></figcaption></figure> <figure><img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2F70s5Y6zuMvUWSRiy8V90%2Funknown%20(1).png?alt=media&amp;token=6e187425-c7e4-4805-9bdc-fe9d5a18c322" alt=""><figcaption></figcaption></figure></div>

The Kon-Tiki oven is a cone-shaped metal structure designed to transform plant waste, such as branches, small logs, husks, and other organic materials, into biochar through a heating process with little oxygen.

Its design promotes controlled combustion, reduces smoke production, and allows for the safe and efficient production of good-quality biochar.

## Main cone fabrication (Cone dimensions)

The main cone forms the structure of the oven. Its shape allows for heat concentration and control of airflow.

<img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2FCjhP0Rv2CZPAheIBw2n9%2Funknown.png?alt=media&amp;token=ffa02483-4571-4eab-ba6c-226f22e31b16" alt="" height="308" width="360">

| **Top diameter**         | 150 cm (59") |
| ------------------------ | ------------ |
| **Bottom diameter**      | 82 cm (32")  |
| **Height**               | 93 cm (36.6  |
| **Wall angle**           | 70°          |
| **Approximate capacity** | 1000 L       |
| **Steel thickness**      | 3 mm(1/8")   |

## Main cone preparation sheet cutting

The sheet is cut into the shape of an annular sector (as shown in the plan), then rolled up to form the cone.

<img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2FlcLS7dnY4YWZqgf1kH5V%2Funknown.png?alt=media&amp;token=ab198208-69ca-4db7-a6cf-3eef2213f17a" alt="" height="204" width="449">

<table data-header-hidden data-first-column-sticky><thead><tr><th width="365.3359375"></th><th></th></tr></thead><tbody><tr><td><strong>Outer radius:</strong></td><td>219,3 cm</td></tr><tr><td><strong>Inner radius:</strong></td><td>120,3 cm</td></tr><tr><td><strong>Sector angle:</strong></td><td>61.56°</td></tr><tr><td><strong>Outer edge length (arc length):</strong></td><td>224,4 cm</td></tr><tr><td><strong>Sheet width (distance between radius):</strong></td><td>115,9 cm</td></tr><tr><td><strong>Steel thickness:</strong></td><td>3 mm</td></tr></tbody></table>

## BOLOM DOME: Construction of the lower dome

The lower dome provides structural strength and directs water and debris towards the drain during furnace shutdown.

<div align="center"><figure><img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2FFgrGINPfYMZbawnXtjCa%2Funknown.png?alt=media&amp;token=0e708275-5dc6-42d5-913c-77dbf092ca97" alt="" width="378"><figcaption></figcaption></figure></div>

### Construction

The bottom plate should be pressed in the center to form a dome approximately 10 to 15 cm (4–6”) deep. An 8 cm (3”) diameter drain should be installed in the center of the dome.

<figure><img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2F1kJ962VUMU1aRGaM4UhT%2Funknown.png?alt=media&amp;token=a772f8f8-4425-46a0-b48c-6278171cb2b2" alt=""><figcaption></figcaption></figure>

## BOLOM DOME Grid Installation

The grate prevents fragments of biochar from entering the drain and obstructing the water outlet during shutdown.

<img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2FU5hJnLC0SUF0xsMInwJE%2Funknown.png?alt=media&amp;token=f7b69068-03b4-4c52-8278-f04245039ba3" alt="" width="490">

### Construction

Install a removable grate over the drain with a mesh opening of approximately 10 mm (3/8").

![](https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2F3TYOkOJVZjo68Gk7XE3O%2Funknown.png?alt=media\&token=577fb7e8-fd59-4c9c-9e4d-d51d75e0332b)

## Shutdown and drain

The drainage system allows the water used to extinguish the biochar to be evacuated and prevents the accumulation of liquids inside the oven.

<figure><img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2FhDotDwGZ8RrxVAePTxTL%2Funknown%20(1).png?alt=media&amp;token=b5a7167b-e633-4907-bc20-bce87e245459" alt=""><figcaption></figcaption></figure>

### Construction

Install a 7 to 8 cm drain that must remain covered during carbonization. To extinguish, screw a 100 cm long, 2 cm diameter tube connected to a water source.

<figure><img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2FKIqU9w6LrviidjYAZSQ5%2Funknown.png?alt=media&amp;token=3e506f1a-e6a9-43e5-8c7f-fcdc31ee7d8c" alt=""><figcaption></figcaption></figure>

## Installing the legs

![](https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2Fjh11h9NYzavdkFTgft7E%2Funknown.png?alt=media\&token=df28b93f-84ae-4843-bdab-6afaa100dd01)

* Install three legs 30 cm (300 mm) long.
* Tilt them 40° outwards.
* Maintain a ground clearance of 10 cm (100 mm) between the bottom of the dome and the supporting surface.

<img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2FGWz77hBImATNylXTymj6%2Funknown.png?alt=media&amp;token=be3d9f1d-920f-4f15-ad82-8d23a623c07d" alt="" height="395" width="367">

## Installation of the handles

<img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2FYKWBLpxV7QcWuLTGkrRe%2Funknown.png?alt=media&amp;token=c4a9ac35-5240-4623-9298-8d60d8493a5f" alt="" height="348" width="351">

The handles make it easy for two people to transport and handle the oven.

### Construcción

<div align="center"><img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2Fkm1jUvWSUEOIds8PrBbY%2Funknown.png?alt=media&amp;token=60999338-8d29-44e2-b497-ee736c1ab3e9" alt="" height="330" width="372"> <figure><img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2FXPyt36EigzA5w8hKjsNs%2Funknown.png?alt=media&amp;token=97ce2657-f3e1-4726-af65-afa00ee4c1c1" alt=""><figcaption></figcaption></figure></div>

Install two 20 cm (8") long metal handles on opposite sides of the oven.

Recommendation: Position the handles at the same height for easier balancing during transport.

## Making the edge protector

<img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2FD2CsBaCaBrf66WumJNlQ%2Funknown.png?alt=media&amp;token=f64b3a3a-6449-4866-a2c2-022cf40dc1ba" alt="" height="299" width="439">

Fabricate the guard from a 0.6 mm thick sheet of steel.

* Weld three 10 mm bolts to one end.
* Drill three aligned holes at the opposite end.
* Join both ends and secure them with wing nuts so the guard can be easily opened and closed.

### Dimensions

* Diameter: 162cm (64")
* Height: 100cm (39")
* Blade length: 519 cm (204")
* Overlap: 5cm (2")

<img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2F7xrV5JjTYjfZYMXLijIH%2Funknown.png?alt=media&amp;token=2451b88e-cc85-46be-bf87-35c3e3a18c29" alt="" height="431" width="400">

## Making the protector hooks

<img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2Fu6sonx50MAJZawGSJyiM%2Funknown.png?alt=media&amp;token=5e240e04-7672-40e0-9ca5-edebc3abec23" alt="" height="250" width="455">

The hooks secure the edge guard and allow for its removal when needed.

### Construction

<img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2F9kpqv9Tx91dmJbBywMT6%2Funknown.png?alt=media&amp;token=ae0103fa-d3c3-4eb6-affb-b70c562a43ca" alt="" height="491" width="392">

Weld eight hooks evenly spaced around the guard, approximately 70 cm (28") apart. The attachment point should be 8 cm (3") below the top edge of the guard.

## Visual appearance

The outer face of the edge protector must be painted with black lacquer and bear a white inscription with the following text:

<img src="https://4194359947-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUBWP4JDLn07D1d4y0DKE%2Fuploads%2FdZRr3BHYCqnjvxm2eDVi%2Funknown.png?alt=media&amp;token=43217c7d-f6b9-4fcc-9c02-139061475fa2" alt="" height="316" width="574">


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://sexytrees.savimbo.com/practice-guide/biochar/fabrication-of-kon-tiki-kiln.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
